Parameter | Description |
Name | Name of the Unit. |
Description | Description of the Unit. |
Template name | Name of the Unit Type Template |
Template version | Version of the Unit Type Template |
Min time between call next | Defines the time that must elapse between two call next on a service point for a specific user (seconds). |
Parameter | Description |
Name | Name of the Unit. |
Description | Description of the Unit. |
Type name | Name of the Unit Type. |
Type description | Description of the Unit Type. |
Unit id | Identification code of the Unit. |
Store next | Defines if store next is enabled or not. |
Confirm Needed | If this check box is checked, each visit needs to be confirmed that it has arrived. |
LED show when calling | From the drop-down list, select what to show on the LED display when calling a visit. |
LED Flash service point | Flash service point id when calling a visit (used only when both service point id and ticket id are shown). |
LED Open text | Text on LED display when service point is open but not serving any visit. Leave empty if not used. |
LED Open scroll direction | Select the wanted scrolling direction for LED Open text, from the drop-down list. |
LED Open scroll speed | Select the wanted scroll speed for LED Open text, from the drop-down list. |
LED Closed text | Text on LED display when service point is closed. Leave empty if not used. |
LED Closed scroll direction | Select the wanted scrolling direction for LED Closed text, from the drop-down list. |
LED Closed scroll speed | Select the wanted scroll speed for LED Closed text, from the drop-down list. |
Device Controller | From the drop-down list, select which default Device Controller should be used. |
Delivered Services | If this check box is checked, the Delivered Services panel will be visible. |
Multi Services | If this check box is checked, the Multi Services panel and popup will be visible. |
Outcomes | If this check box is checked, the Outcomes will be visible. |
Custom Marks | If this check box is checked, it will be possible to add Marks. |
Marks type | Marks type to be used for the custom Marks. |
Multi Marks | If this check box is checked, you can add x number of Marks at once. |
Recycle Button | If this check box is checked, the Recycle button is available. |
No Show Button | If this check box is checked, the No Show button is available. |
Walk Direct button | If this check box is checked, the Walk Direct button is available. |
Remove from Queue | If this check box is checked, the possibility to remove a specific ticket from a Queue is available. |
Transfer First | If this check box is checked, it is possible to transfer to the first position in the Queue. |
Transfer Last | If this check box is checked, it is possible to transfer to the last position in the Queue. |
Transfer Sorted | If this check box is checked, it is possible to transfer sorted, according to enter time into the Queue. |
LED flash time | LED Display flash time (seconds). |
LED turn off time | Automatically turn off service point display after this time of inactivity (seconds). |
Auto close | Automatically close service point after this time of inactivity (seconds). |
Parameter | Description |
Default name | Default name of the Unit. |
Description | Description of the Unit. |
Number of units (max 127) | Enter the number of units to create when publishing this unit to a configuration. |
Unit Identifiers | A table with unit identifiers, which is dependant on which Number of units you have entered in the field above. So, if the number 4, for example is entered, the table will automatically get 4 rows. The two columns of the table are: • Name - Name of the unit, by default the name of the unit plus a sequential number, for example WebReception 5 or WebServicePoint 2. Can be changed to anything, so long as the name is unique, within the Branch. • Logic ID - An ID used in the connectors. The Logic ID continues with the next number in the sequence of the auto generated ID's within the Unit Type (e.g. Service Points, Entry Points, or Presentation Points). The number can be changed to anything, in the range of 1-9999, as long as it is unique within the Service Point, Entry Point, or Presentation Point. Example: If you have a total of 4 units and let the first three keep the automatically set Logic ID’s 1-3, then manually set the fourth unit to Logic ID 12, then change the Number of units to 5, the fifth unit will automatically get Logic ID 4. |
Unit id | Identification code of the Unit. |
LED ID Code | LED ID code. Valid values between 1-125. |
Device Controller | Name of Device Controller that is used. |
Customer information | This check box marks whether or not it should be possible to edit/select customer information. |
Service Point Pool View | If this check box is checked, the Service Point Pool overview will be visible. |
User pool view | If this check box is checked, the User pool view is visible. |
Queues view | If this check box is checked, the Queues overview is visible. |
User Pool Transfer | If this check box is checked, transfer to the User Pool is possible. |
Service Point Pool Transfer | If this check box is checked, transfer to the Service Point Pool is possible. |
Transfer Button | If this check box is checked, the Transfer button is available. |
Notes Button | If this check box is checked, the Edit/Add Notes button is available. |
Park Button | If this check box is checked, the Park button is available, making it possible for you to send a customer to your User Pool. |
Transfer from Queue | If this check box is checked, the possibility to transfer a specific ticket from the Queue is available. |
Call from Queue | If this check box is checked, it is possible to call a specific ticket from the Queue. |